OAK-FFC 4P PoE

OAK-FFC 4P PoE is a flexible and powerful prototyping platform that allows you to connect up to 4 FFC camera modules that best fit your project requirement (please se the list bellow) in terms of resolution, FPS, FOV, shutter type, and depth of focus. It also features on-device Neural Network inferencing and Computer Vision capabilities. Up to 4 cameras: two 2-lane MIPI and two 4-lane MIPI Micro SD card connector for DepthAI SoM 3.3V SDIO 4 TOPS of processing power (1.4 TOPS for AI) PoE with passthrough support Description This platform has OAK-SoM-PRO on board offering 4 TOPS of processing power (1.4 TOPS for AI – RVC2 NN Performance), capable of running any AI model (models need to be converted) and CV task on the device. It supports encoding in H.264, H.265, and MJPEG at 4K/30FPS, 1080P/60FPS. Computer vision features include warp, resize, crop via ImageManip, edge detection, and feature tracking, with the ability to run custom CV functions. It offers stereo depth perception with post-processing, RGB-depth alignment, and high configurability. Object tracking includes 2D and 3D tracking via the ObjectTracker node. We suggest following getting started guide for smooth experience. Key Features RVC2 architecture on-board features: 4 TOPS of processing power (1.4 TOPS for AI – RVC2 NN Performance) Run any AI model, even custom architected/built ones (models need to be converted) Encoding: H.264, H.265, MJPEG – 4K/30FPS, 1080P/60FPS Computer vision: warp (undistortion), resize, crop via ImageManip node, edge detection, feature tracking. You can also run custom CV functions Stereo depth perception with filtering, post-processing, RGB-depth alignment, and high configurability Object tracking: 2D and 3D tracking with ObjectTracker node Specification Dimensions: 125x63x34 mm (with heatsink) Weight: 81g (PCBA with heatsink) Power and data Power consumption: up to 5.5W Passthrough Power-over-Ethernet (PoE) power source Gigabit ethernet for data USB 3.1 Gen1 Type-C for data (see technical details) Note: It is not possible to power the OAK-FFC-4P-POE via the USB-C connector. So to connect through the USB-C, you will need to power via RJ45 (POE). Compatible Camera Modules Note: Please take note that the manual calibration is needed when the camera modules are connected. Please follow the calibration guide. Sensor MP Color/Grayscale Shutter Type Focus Type Wide FOV DFOV / HFOV / VFOV M12 Mount OAK-FFC-IMX214-W 13MP Color Rolling FF: 50 cm – Yes 117 / 105 / 88 – OAK-FFC-IMX378 12MP Color Rolling AF: 10 cm – – 81 / 69 / 55 – OAK-FFC-IMX378-FF 12MP Color Rolling FF: 50 cm – – 82 / 69 / 55 – OAK-FFC-IMX378-W 12MP Color Rolling FF: 50 cm – Yes 120 / 108 / 93 – OAK-FFC-OV9282 1MP Grayscale Global FF:19.6 cm – – 89 / 80 / 55 – OAK-FFC-OV9282-M12 1MP Grayscale Global FF: 20 cm – – HFOV: 75 Yes OAK-FFC-OV9282-W 1MP Grayscale Global FF: 19.6cm – Yes 150 / 127 / 79.5 – OAK-FFC-OV9782-M12 1MP Color Global FF: 20 – – HFOV: 75 Yes OAK-FFC-OV9782-W 1MP Color Global FF: 19.6 cm – Yes 150 / 127 / 79.5 – OAK-FFC-IMX577-M12 12MP Color Rolling AF:10 cm – – HFOV: 75 Yes OAK-FFC-AR0234-M12 2.3MP Color Global FF: 45cm – – 100 / 82 / 56 Yes OAK-FFC-IMX582 32MP Color Rolling AF: 20cm – – 71 / 45 / 55 – This board is also compatible with RPi camera interface. For that you will need a FFC from Arducam, which converts 26-pin Luxonis camera pinout to 22 pin RPi camera pinout. Technical Details General information 2x 2-Lane MIPI interface 2x 4-Lane MIPI interface PoE for connectivity and power Interface for Luxonis OAK-SoM-Pro Pads for OAK-SoM 1.8V SPI Pads for OAK-SoM 3.3V SDIO Pads for OAK-SoM 1.8V Aux Signals (I2C, UART, GPIO) PSRBS connector for FSYNC 5V Fan OR USB Type-C Design files produced with Altium Designer 20 PoE (Power-over-Ethernet) This device also supports PoE passthrough, so you can daisy chain multiple OAK-FFC 4P PoE boards. As the chip is PoE 802.3af, it can supply up to 15.4W of power, which means you can connect up to 3 devices in a row (as each consumes ~5W of power).Note that if you have longer cables and/or utilize all available computation (NN, Stereo, CV, video encoder, CPU, etc.), it might be that you could only connect 2 devices in a row. Integrated IMU This OAK camera has an integrated BNO085, a 9-axis IMU (Inertial Measurement Unit). See IMU node for the API details on how to use it. Power consumption Most of the power is consumed by the RVC2, so the power consumption mostly depends on the workload of the VPU: Base consumption + camera streaming: 2.5W – 3W PoE circuitry: 0.5W AI subsystem consumption: Up to 1W Stereo depth pipeline subsystem: Up to 0.5W Video Encoder subsystem: Up to 0.5W So the total power consumption can be up to ~5.5W if you are using all the features at 100% at the same time. To reduce the power consumption, you can reduce FPS of the whole pipeline – that way, subsystems wont be utilized at 100% and will consume less power. Temperature The ambient operating temperature of RVC2 based devices is between -20C and 50C when fully utilizing the VPU. To find out more, see our operating temperature range documentation. Package Includes OAK-FFC-4P-PoE assembly Ethernet cable, 2m Note: PoE injector / switch is required to power the device and it is not included in the packaging. If you need an injector, you can buy it here. Note: Camera modules are not included in the packaging. List of available cameras is here. Files 3D model (STEP file download) Altium Design Files Assembly Drawing Assembly Outputs Fabrication Drawing Fabrication Outputs Schematic